Close
The Unibase enables routers with non -standard guide bush fittings to accept the range of Trend guide bushes, Will fit directly to most routers.
Line -up pin used with a 16 mm plastic bush to ensure concentricity of the cutter to the guide bush when fitting the sub -base. Suits collet sizes 1/4inch, 8mm, 12 mm and 1/2inch.
Instructions for fitting.
The line -up pin fit into the collet and is plunged through the router base. The line -up bush is fitted into the Unibase and secured. This is then placed over the line -up pin and rotated in order to line up the fixing holes. The Unibase screws are tightened and then the line -up bush can be replaced with any choice of Trend guide bushes. These range from 10 mm up to 30 mm (GB10 - GB32). For larger diameter cutters a 40 mm guide bush (GB40) is available.
| ACCESSORY TYPE : | SUB BASE |
| CORDED/ CORDLESS : | BOTH |
| PRODUCT GROUP : | ACCESSORY |
| SUB-TYPE : | ROUTER BITS |
| TYPE : | ROUTERS & PLANERS |
