so you are currently saving an extra £6.05
Trend KWJ700 Tradesmen Kitchen Worktop Jig
Video will open in a new window
Using the eBay App? Paste link into a browser window:
Length: 985mm
Width: 390mm
Thickness: 12mm
Weight: 5.4Kg
End Cut: 45 Degrees
Corner Radius: 40mm
Corner Radius: 100mm
Corner Radius: 400mm
Corner Mitre Joint: 45 Degrees
Female Cut Material Width Loss: 35mm
Jig Requirements:
Guide Bush: 30mm
Plunge Router: 1/2 Inch (min 1300 watts)
Cutter: 12.7mm x 50mm Cut
Clamps: Two
Hard wearing solid laminate 12mm thick jig that cuts both parts of the joint in 15 minutes including set up |
Left hand and right hand corners, 400mm radius peninsular joint, 45 degree end cut with radius, 45 degree trade corner solution for hob units, 100mm radius corner, 40mm radius corner, 35mm kitchen door hole and 3/4 inch BSP hole for mixer taps |
Fixed lengths for 250mm, 300mm, 400mm, 500mm, 550mm, 600mm, 616mm, 650mm and 700mm wide worktops |
Cuts up to 40mm thick worktops with or without anti-drip post-formed edge |
Three open ended bolt recesses (dog bones) for 150mm bolts |
Engraved lines for short 65mm bolts and worktop cross-cut |
10mm diameter plastic pins with a tapered shoulder for a tight fit that ensures three point pin contact for ease of set up |
Engraved markings for identifications of pin holes |
ACCESSORY TYPE : | JIG |
CORDED/ CORDLESS : | CORDED |
PRODUCT GROUP : | ACCESSORY |
SUB-TYPE : | ROUTER ACCESSORIES |
TYPE : | JIG |