DESCRIPTION
JHA’S are a one piece, Non-Welded Joist Hanger. Suitable for supporting timber joists from timber members.
A galvanised joist hanger that provides great support with ease of installation.
• Published performance values are based upon 3.75mm x 30mm square twist nailsbeing used throughout.
•Wider strap provides more surface area on the supporting timber andallowsincreased nail spacing, enhancing the performance of the criticalhanger -to -supportpart of the connection.
• Minimum and maximumnailing schedules are stamped into the strap providingcorrectinstallation information for site operatives.
• Speed -prong holdsthe hanger in position to allow easier attachment. The installernolonger has to try to hold hanger, joist and nail with one hand and swingahammer with the other!
• JHA270 range features a location tab which allows easier alignment of the hanger.
• The model number and size is stamped into the seat of the hanger for easyidentification, even after installation.
•Regularised Timber: we have added new sizes to our JHA range to suitregularisedtimber. Use 47mm or 91mm width hangers for this newapplication.
Material:
JHA270—0.9mm pre -galvanised mild steel.JHA450—1.5mm pre -galvanised mild steel.
Installation:
- Alternative installation methods are available depending on the availability of nailing surface.
- Maximum Nailing: All nails must be applied according to the table.
- Minimum Nailing: For a lower installed cost the minimum nailing schedule can beused when the maximum nailing load capacity is not needed.
- A minimum wrap over of 45mm is required.
Loft Conversions (JHA450 Range): Forapplications where the hanger extends below the support. Install top,face, and joist nails according to the table. A minimum wrap over of45mm is required or maximum nailing.
Options:
- Because these hangers are fully die -formed they cannot be modified.
MGMEEM230522A
