Makita DTS141ZJ 18v Oil Pulse Impact Driver Bare Unit MakPacMakita 18v LXT Brushless Oil Pulse Impact Driver Bare Unit in a MakPac type 2 Connector Case - DTS141ZJ
Product #: DTS141ZJ
Makitahttps://img.ffx.co.uk/brands/MAKITA.jpg
RRP 532.0
335.95In Stock
Makita DTS141ZJ 18v Oil Pulse Impact Driver Bare Unit MakPac
Makita 18v LXT Brushless Oil Pulse Impact Driver Bare Unit in a MakPac type 2 Connector Case - DTS141ZJ
Suitable for noise sensitive job site
Model DTS141 is a cordless oil-pulse driver powered by 18V Li-ion battery, featuring a compact and lightweight design thanks to the newly-developed oil unit and brushless motor. By using the Oil Unit as an impact mechanism instead of anvil and hammer, operation noise has been greatly reduced compared with a cordless impact driver. Drastically reduced influence from heat enables consecutive fastening at high speed.
Features and Benefits:
Compact and quiet
Two impacts per rotation.
Electronic 3-stage impact power selection (Hard/Medium/Soft).
T-mode: Tightening mode for self-drilling screw.
Battery fuel gauge.
Variable speed control by trigger.
Forward/reverse rotation.
Electric brake.
LED job light.
One-touch bit installation.
Ergonomic soft grip.
Information and Technologies:
Brushless Motor
The Makita Brushless motor is precision engineered to be up to 50% more efficient than a comparative model. This means a fully charged 18v lithium-ion battery will last almost twice as long as a product running on a standard motor. Without brushes in place to apply friction a Brushless motor can produce a greater measure of torque per weight. With more torque at your disposal less power is required for day to day use, adding to the motors efficiency and extending the products overall lifetime as maintenance becomes less of an issue.
Extreme Protection Technology (XPT)
XPT is a protective seal inside the tool engineered to provide improved water resistance by channelling water and dust from the tool’s key internal components. Engineered for improved operation in harsh conditions.
Technical Specification:
Voltage - 18v Standard Bolt - M5-M8 High Tensile Bolt - M5-M6 Max Fastening Torque - 40Nm Vibration: Fastening Bolt - 7.0 m/sec² Vibration K factor - 1.5 m/sec² Noise sound pressure - 77 dB(A) Net weight - 1.5 kg Driving Shank - 6.35mm / 1/4" Hex Blows per Minute (Hi) - ipm - 0 - 2700ipm Blows per Minute (Med) - ipm - 0 - 2200ipm Blows per Minute (Lo) - ipm - 0 - 1400ipm Machine Screw - M4-M8 Maximum Output - 280w No Load Speed (hard/med/soft) - 0-3200 / 2100 / 2000 rpm
Supplied With:
1x DTS141 Oil Pulse Driver 1x Belt Clip 1x Makpac Type 3 Carry Case
Naked Machine / Body Only. Not Supplied With Batteries or a Charger
VIDEO
FEATURES & BENEFITS
Compact and quiet
Two impacts per rotation.
Electronic 3-stage impact power selection (Hard/Medium/Soft).
